Step One: Get Your Cleaning Materials and Chemicals
Oddly, the very first product you need is a simple one; A pail. A five-gallon container would work nicely. If you do not have one you can get one from your regional hardware store or retail giant. Then you need some bleach. This can be through a liquid or a powder cleaner. (There is also options such as Easy Green's House and Siding Cleaner readily available in the house improvement shops.) Finally, you need a scrubby of sorts. A sponge with a rough side will work perfectly. It might not be wise to utilize a steel wool pad as that can take the paint totally off your garage door. You can also utilize a semi-soft brush with a deal with, which might be a little much easier. Likewise, be sure to use a set of gloves, either leather or latex.
Step Two: Preparation Work
Once you have all your garage door cleaning materials, fill the (five gallon) bucket up midway and put those gloves on. Then pour in about half a cup of bleach. That may look like a small amount however it is very important not to overdo it with the bleach. Of course, if you are not comfy using bleach, there are a couple of alternatives. Dish soap will work, just not too. Multi-purpose cleaner (without bleach) likewise works, but once again, not also.
Step Three: All Set Set Clean!
Now you are all set to clean up that garage door! Make sure you get every panel how to clean my garage door and every fracture and crevice. It is normally better to do the top very first and work your way over from one side to the other. Then you can do the same thing for the bottom. Make certain to put some elbow grease into it and get any areas of mold or mildew off. When the garage door is entirely scrubbed down, you can wash it off with the hose pipe or just by filling the bucket a couple of times. As always, if you have any questions or discover you need some garage door repair services, simply call a Los Angeles garage door repair expert!